Glass bottling · wash · fill · crown-cap ready

Glass Bottle Beverage Filling Machine Up to 12,000 bottles/h.

Glass Bottle Beverage Filling Machine lines pair counter-pressure filling with rinsing and capping for beer and other carbonated drinks, at up to 12,000 bottles per hour.

12,000 bottles/hCapacity at 500 mL reference line

40 filling valvesSpecification table

Get A Custom Quote Watch Line Video ▶

Get a Quote

Since 1995 · CE & ISO 9001 · 150+ countries

Glass Beverage Line Highlights

COUNTER-PRESSURE · ISOBARIC GLASS FILLSSLWG 3-IN-1 WASH · FILL · CAPTOUCHSCREEN CONTROLFACTORY ACCEPTANCE SUPPORTBEER · SOFT DRINKS · SPARKLING WATER

Glass bottle rinsing, filling, and capping on one rotary blockCounter-pressure filling for carbonated glass beverages40 rinsing + 40 filling + 12 capping heads on one rotary block10,000–12,000 bottles/h at the 500 mL reference line

Glass beverage line economics

Glass Bottle Beverage Filling Machine Verified counter-pressure throughput, scoped to your bottle, cap, and CO₂ package.

Compare the up to 12,000 bottles/h headline with the 10,000–12,000 bottles/h specification range at the 500 mL reference line before finalizing output assumptions and CAPEX.

Headline peak

12,000Bottles/h

Matches the “Up to 12,000 bottles per hour” figure shown in the hero.

Filling valves

40Valves

Matches the Filling Valves: 40 line in the specification table above.

Glass Bottle Beverage Filling Machine rated output equipment

Glass Bottle Beverage Filling Machine — rated glass output

Headline peak: Up to 12,000 bottles per hour (hero headline figure)
Filling valves: 40 filling valves in the PRODUCT SPECIFICATIONS module
Reference bottle format: 500 mL reference line (10,000–12,000 bottles/h)

Satisfaction Guaranteed

2 Years Quality Warranty

Overseas Engineer Support Available

On Time Delivery Guaranteed

Glass Bottle Beverage Filling Machine — glass overview.

This Glass Bottle Beverage Filling Machine covers SLWG-series 3-in-1 glass bottle filling equipment for beer, soft drinks, carbonated beverages, mineral water, and sparkling water, with automated capping, precision filling nozzles, and a touchscreen HMI.

Glass bottle rinser

A dedicated rinsing station runs ahead of the filler. Water quality, sanitizer, and drain requirements are confirmed in the integrated mechanical scope.

Counter-pressure fill

An isobaric liquid supply system for gas-containing liquids is the engineering reference for sizing CO₂ supply, tank pressure, and filler setpoints.

Crown-ready capping

The specification table lists 12 capping heads. Where your SKU set needs metal closures, the scope is aligned with a crown capping package and torque validation during factory acceptance.

Glass Bottle Beverage Filling Machine — operational performance.

10K–12K

Throughput at the 500 mL reference line reaches a headline figure of up to 12,000 bottles per hour. Final output is confirmed against your bottle size, carbonation level, cap type, and accepted line layout before the commercial offer is fixed.

40 · 40 · 12

The specification table lists 40 rinsing valves, 40 filling valves, and 12 capping heads — the counts to compare when quoting against the same monoblock class.

8.5 kW

Installed electrical demand is listed in the specification table. Motor starters, VFDs, and utility drop locations are finalized in the project data sheet and confirmed in the technical offer.

Glass Bottle Beverage Filling Machine — wash, fill, cap

Glass Bottle Beverage Filling Machine monoblocks integrate washing, counter-pressure filling, and capping for returnable and single-use glass bottles across beer, soft drinks, and sparkling water.

Glass Bottle Beverage Filling Machine — rinsing system on rotary glass line

Washing

The rotary rinsing section runs with nozzle count, dwell time, and drain routing matched to your water treatment package.
Treat the glass bottle rinser filler sequence as one mechanical story: clean bottles in, controlled drip-out, indexed transfer into the fill turret.
Sanitizer concentration, temperature windows, and recovery tank capacity are agreed in the factory acceptance checklist for your specific product chemistry.

Filling

Precision filling nozzles are arranged on 40 filling valves and paired with counter-pressure setpoints for carbonated SKUs.
The touchscreen HMI is the operator interface for recipe handling, alarms, and speed trims during production.
When your portfolio includes beer or high-CO₂ soft drinks, align the isobaric supply narrative with tank pressure, snift timing, and fob detector strategy in the integrated P&ID.

Capping

The capping turret carries 12 heads, suited to crown or twist-off closures on beer bottle filling equipment.
Interlocks for missing bottles or caps should be rehearsed during SAT so operators see fault states before ramping to full speed.
Cap torque, capping height, and cap sorter feeds are set during project configuration, with acceptance values recorded alongside the signed mechanical scope.

Glass Bottle Beverage Filling Machine engineering highlights

ProcessThis Glass Bottle Beverage Filling Machine overview describes washing, counter-pressure filling, and capping for beer, soft drinks, carbonated beverages, mineral water, and sparkling water in glass.
ConstructionStainless rinsing and product-contact surfaces are specified for beverage duty. Material grades and weld documentation are confirmed in the project data pack.
UtilitiesRinse media, CO₂, compressed air, and electrical supply are defined per project. Installed electrical demand is 8.5 kW, per the specification table.
Quality systemsProject documentation can be aligned to ISO 9001:2015 quality management principles during factory acceptance.

Specification rows are reference values for this monoblock; the final configuration is confirmed in the signed technical offer. The ISO reference explains the standard’s intent and is not a certificate claim.

Glass Bottle Beverage Filling Machine — specifications

Specifications below cover rinsing valves, filling valves, capping heads, power, and overall dimensions for the glass beverage monoblock. Items not listed are project-specific and are confirmed in the technical offer.

Valve & head counts: 40 rinsing valves, 40 filling valves, 12 capping heads.
Throughput headline: 10,000–12,000 bottles per hour at the 500 mL reference line.
Power: 8.5 kW electrical demand.
Footprint: overall dimensions 4,550 × 2,650 × 2,400 mm (L × W × H).

Item	Specification
Rinsing valves	40
Filling valves	40
Capping heads	12
Power	8.5 kW
Overall dimensions (L × W × H)	4,550 × 2,650 × 2,400 mm
Headline throughput	10,000–12,000 bottles per hour at 500 mL reference line
HS code	8422301090

Glass Bottle Beverage Filling Machine — plant layouts

Layout planning is based on bottle flow, rinser–filler–capper access, conveyor routing, labeling and packing positions, and service clearance. GA drawings, conveyor interface details, and utility schedules are issued with the equipment quotation.

REF: GLASS-BEVERAGE-FILLER-GA-PACK

5 gallon filling line equipment layout reference with monoblock and process flow arrangement

Carbonated glass duty

Glass Bottle Beverage Filling Machine — keep carbonated fills stable with utility planning agreed at project stage.

Rinse and fill discipline

Stainless rinsing paths, indexed glass handling, and touchscreen-controlled filling support cleanability and stable carbonation in production. These are design features for planning and comparison, not measured performance guarantees.

Glass + crown handling

Carbonated glass lines need stable depalletized infeed, controlled foaming, and crown torque discipline—capture each requirement in the integrated mechanical scope and factory acceptance checklist.

Glass Bottle Beverage Filling Machine — line walkthrough

… the field team rehearsed low-speed foam faults with our operators before we ramped to full production speed.

Line Lead — Glass beverage packaging plant

Exported to 150+ Countries24/7 Rapid Response SupportTurnkey Engineering Services

Get a Quote for This Machine

Since 1995 · CE & ISO 9001 · 150+ countries

FAQ — Glass Bottle Beverage Filling Machine procurement

How do the 12,000 bottles/h headline and the 10,000–12,000 bottles/h specification range relate?

Up to 12,000 bottles per hour is the headline figure; the specification table states 10,000–12,000 bottles per hour at the 500 mL reference line. Final output is confirmed against your bottle, cap, CO₂, and utility package in the quotation and the factory acceptance test.

Which beverages and closure styles does this machine cover?

The monoblock is built for beer, soft drinks, carbonated beverages, mineral water, and sparkling water. Where your SKU mix needs metal crowns, the scope is aligned with a crown capping package and torque validation, and changeover trials are run against your neck finish drawings.

What upstream equipment should we budget beside the filler?

Glass beverage lines typically need treated water, depalletized infeed, labeling, shrink bundling, and palletizing sized to the same bottle envelope. Use the related equipment destinations above, then confirm flows and automation handshakes in the integrated P&ID package.

How do we obtain the plant layout drawings (GA)?

Layout stills shown on this page are for planning only. The current GA drawings, conveyor interfaces, and utility drops are issued with the quotation package.

What documentation should we expect around hygiene and commissioning?

Mechanical FAT, electrical drawings, rinse and sanitizer procedures, CO₂ supply diagrams, and training packs are listed in the milestone schedule. Fill-height, crown-torque, and leak-check acceptance tests are recorded in writing, with the scope confirmed in the signed technical agreement.

Get A Custom Quote

Glass Bottle Beverage Filling Machine Up to 12,000 bottles/h.

Get a Quote

Glass Bottle Beverage Filling Machine Verified counter-pressure throughput, scoped to your bottle, cap, and CO₂ package.

Glass Bottle Beverage Filling Machine — rated glass output