TDS-EC calculator

Beverage Production Calculators Collection

TDS-EC Calculator

Warning: iBottling cannot be held responsible for errors in the calculation, the program itself or the explanation. For questions or remarks, please contact our friendly iBottling support team.

Water Type: Freshwater Seawater Wastewater Temperature (°C): Electrical Conductivity (μS/cm): Calculate TDS

View Water Treatment System Recommendations

How to Use the TDS-EC calculator

1. Determine the Electrical Conductivity (EC):
   
   • The first step is to measure the total electrical conductivity (EC) of the water sample using an EC meter.
2. Choose the Water Type:
   
   • The calculator allows you to select the water type - freshwater, seawater, or wastewater. This is important because the TDS-EC relationship can vary depending on the water composition.
3. Input the Temperature:
   
   • The calculator requires the temperature of the water sample, as electrical conductivity is temperature-dependent. It will apply a temperature correction to the TDS calculation.
4. Enter the EC Value:
   
   • Once you have the EC value, input it into the calculator.
5. Calculate the TDS:
   
   • The calculator will then use the provided formula (TDS = EC * 0.64 for freshwater, or different factors for seawater and wastewater) to determine the Total Dissolved Solids (TDS) value.
6. Interpret the Results:
   
   • The calculator will display the calculated TDS value in mg/L or ppm.

It's important to note that the TDS-EC relationship can be more complex, as it can be influenced by the specific ionic composition of the water. The search results mention that using ion-specific conductivity coefficients may provide more accurate results, but this requires a detailed water analysis.Additionally, the search results highlight the limitations of TDS meters, as they are essentially EC meters with a built-in conversion factor, which may not always be accurate, especially for complex water compositions. For more precise TDS measurements, gravimetric analysis in a laboratory may be recommended.Overall, this TDS-EC calculator provides a quick and convenient way to estimate the TDS of a water sample based on its electrical conductivity, but users should be aware of the potential limitations and consider the water type and composition when interpreting the results.

Ready to speak
with a expert?

Contact Agents