Filling & Packaging Glossary
The words buyers and engineers use when they specify a bottling or packaging line, from output ratings and filling principles to labels, shrink film and pallets. Each term links to the matching machine or complete line.
Filling & Packaging terms A–Z
- 3-in-1 monoblock (rinser-filler-capper)
- A single machine that rinses, fills and caps bottles on one frame with synchronized starwheels, so the open bottle travels a very short distance. PET water filling machine →
- Air conveyor
- A conveyor that moves empty, light PET bottles by their neck ring using blown air, usually between the blow molder and filler. Beverage conveyor system →
- Aseptic filling
- Filling a commercially sterile, cooled product into sterilized containers in a sterile zone. It allows low-acid and preservative-free drinks to be shelf-stable without heating the bottle. UHT tube sterilizer →
- Auger filler
- A powder filling machine that doses product by turning a vertical screw a set number of revolutions. Common for milk powder, protein, coffee and drink mixes. Powder filling machine & line →
- BPH (bottles per hour)
- The rated output of a filler or line in containers per hour, always quoted for a stated container size. Larger containers usually run at a lower BPH on the same machine. Water bottling lines →
- Can seaming (double seam)
- Joining the can end to the can body by rolling their edges together in two operations to form an airtight seal. Aluminum can filling machine →
- Capping torque
- The rotational force used to tighten a screw cap. Too little risks leaks; too much makes the cap hard to open or damages the thread.
- CIP (clean-in-place)
- Cleaning tanks, pipes and fillers by circulating water, detergent and sanitizer through them without dismantling. Cycles are set by time, temperature, concentration and flow.
- Cold fill
- Filling product at or below room temperature, typically for water, CSD and drinks with preservatives or later pasteurization.
- CPH (cans per hour)
- The can-line equivalent of BPH: rated output in cans per hour for a stated can size. Aluminum can filling machine →
- Crown cork
- The crimped metal cap used on glass beer and soft-drink bottles, applied by a crowner. Glass bottle beverage filler →
- CSD (carbonated soft drink)
- A sweetened, flavored drink with dissolved CO₂, such as cola or lemon soda. CSD lines need cold product, carbonation and counter-pressure filling. CSD & soda bottling lines →
- Date coding
- Printing batch, date and traceability codes on each container or pack, by inkjet or laser. Laser coding machine →
- Fill level tolerance
- The permitted deviation from the target fill height or volume. It is checked with fill level inspection and drives filler valve and container quality choices.
- Gravity filling
- Filling by letting liquid flow from a tank above the valve under its own weight. Common for still water and other non-carbonated, low-viscosity liquids. PET water filling machine →
- Headspace
- The gas-filled space between the liquid and the closure. It allows for expansion and is controlled to manage fill level, oxygen pickup and pressure.
- Hot fill
- Filling a high-acid product, such as juice or tea, at an elevated temperature so the heat also treats the container and closure. PET bottles for hot fill are heat-set and often have vacuum panels. Hot juice filling machine →
- Induction sealing
- Bonding a foil liner inside the cap to the container mouth with an electromagnetic field, giving a tamper-evident, moisture-tight seal without contact. Powder filling machine & line →
- Isobaric (counter-pressure) filling
- The container is first pressurized with CO₂ to the same pressure as the product tank, then liquid flows in by gravity. It keeps carbonation in solution and limits foaming. PET CSD filling machine →
- Level filling vs volumetric filling
- Level filling fills each container to the same height, giving a uniform look on shelf. Volumetric filling measures the same volume into each container, regardless of small differences in container size.
- Lightweighting
- Reducing the PET weight of a bottle or preform while keeping the strength needed for filling, capping, transport and stacking. PET bottle lightweighting design →
- Line efficiency (OEE)
- Overall equipment effectiveness: availability × performance × quality. It shows how much of the rated output a line actually delivers.
- Liquid nitrogen dosing
- Adding a small drop of liquid nitrogen before capping or seaming. It expands into gas, pressurizes still drinks in thin containers and pushes out oxygen.
- Neck finish
- The standardized thread and sealing geometry at the top of a bottle that the cap must match, named by codes such as PCO 1881 or 30/25.
- Palletizer
- A machine that stacks cases or packs onto pallets in a set layer pattern, at the end of the line. Automatic bottle palletizer →
- Piston filler
- A volumetric filler that draws a set volume into a cylinder and pushes it into the container. Suited to thicker liquids, sauces and oils.
- Preform
- An injection-molded PET tube with a finished neck thread. It is heated and blown into a bottle on a stretch blow molding machine. Automatic PET blow molding machine →
- rPET
- Recycled PET made from collected bottles. Food-grade rPET can be blended into new preforms; it can need adjusted heating in blow molding. rPET compatible solutions →
- Shrink sleeve label
- A printed plastic tube placed over a container and shrunk with heat or steam so it follows the shape, allowing full-body decoration. Shrink sleeve labeling machine →
- Shrink wrapping
- Grouping containers into packs and wrapping them in PE film that shrinks in a heat tunnel to hold the pack firmly. Shrink wrapping machine →
- Stretch blow molding (SBM)
- Heating a PET preform, stretching it with a rod and blowing it with high-pressure air against a mould to form a bottle. Automatic PET blow molding machine →
- Tunnel pasteurization
- Heating filled and sealed bottles or cans as they move through spray zones of hot water, holding them, then cooling them. Common for beer and canned drinks. Tunnel pasteurizer →
- UHT (ultra-high temperature)
- Heating a liquid to a very high temperature for a few seconds before filling, then cooling it quickly. Used for milk, plant drinks and aseptic juices. UHT tube sterilizer →
- Ultra-clean filling
- A hygiene level between standard and aseptic filling, using filtered air, enclosed filling zones and stricter cleaning to extend shelf life of chilled or sensitive drinks.
- Unscrambler
- A machine that takes containers loaded in bulk and orients them upright into a single file on the conveyor. Powder filling machine & line →
- Wrap-around (OPP) label
- A label from a reel of printed film, cut and glued around a round container with hot melt. Common on water and CSD bottles. OPP hot melt labeling machine →

