Brewing Glossary: Beer Production & Packaging Terms

Short, practical definitions for the brewhouse, the cellar and the packaging hall. Use this brewing glossary when you read a brewery equipment proposal or plan a move from kegs to bottles and cans.

Brewing & Beer Packaging terms A–Z

ABV (alcohol by volume)
The percentage of the beer's volume that is ethanol. It must be declared on the label in most markets.
Adjunct
Any unmalted source of fermentable sugar, such as rice, corn or sugar syrup, used alongside malt to change body, color or cost.
Ale vs lager yeast
Ale yeast ferments at warmer temperatures and tends to give fruitier flavors. Lager yeast ferments cold and slowly, giving a cleaner profile.
Attenuation
The share of the wort's sugar that yeast has fermented, calculated from original and final gravity.
Beer filtration
Removing yeast and haze-forming particles from beer before packaging, using filter aids, sheets, cartridges or membranes. Beverage filtration system →
Bottle conditioning
Adding a small amount of sugar and yeast at packaging so a secondary fermentation carbonates the beer inside the bottle or can.
Brewhouse yield
How much of the malt's potential extract the brewhouse actually recovers into wort. It is a key efficiency figure for comparing brewhouses.
Bright beer tank (BBT)
A pressure tank holding finished, clarified and carbonated beer ready for packaging.
Canning line
A line that depalletizes empty cans, rinses, fills with counter-pressure, seams the lid and codes each can. Aluminum can filling machine →
Conditioning (lagering)
Holding beer cold after primary fermentation so flavors mature, yeast settles and the beer clears.
Counter-pressure beer filler
A filler that purges and pressurizes each bottle or can with CO₂ before filling, protecting the beer from oxygen and foaming. Glass bottle beverage filler →
Degrees Plato (°P)
Grams of extract per 100 g of wort, the standard brewing measure of wort strength. Close in value to Brix.
Diacetyl rest
A short warm hold at the end of fermentation that lets yeast reabsorb diacetyl, a compound with a buttery off-flavor.
Dry hopping
Adding hops to beer during or after fermentation to add aroma without adding much bitterness.
EBC / SRM (color)
Two scales used to measure and specify beer color, from pale straw to black. EBC values are roughly twice SRM values.
Fermentation tank (FV / unitank)
A cylindro-conical vessel where wort ferments. A unitank can also be pressurized to condition and carbonate the beer in the same tank. Beer & alcohol bottling lines →
Final gravity (FG)
The density of beer when fermentation is complete. The gap between OG and FG is used to estimate alcohol content.
Flash pasteurization
Heating beer briefly in a plate heat exchanger before filling. It needs a clean filling process afterwards to protect the treated beer.
Fobbing
Deliberately causing a little foam before closing a bottle or can, often with a jet of hot water or CO₂, to push air out of the headspace.
Force carbonation
Dissolving CO₂ into beer under pressure in a tank or in-line, instead of relying on natural carbonation from fermentation.
Glycol jacket
Cooling channels on a tank wall through which chilled glycol flows, letting the brewer control fermentation temperature. Beverage water chiller →
Hops
Cone-shaped flowers of the hop plant that add bitterness, aroma and natural preservation to beer.
IBU (International Bitterness Units)
A lab measure of bitterness compounds in beer, mainly from hop iso-alpha acids. Higher IBU means more bitter, though perceived bitterness also depends on sweetness and style.
Keg and kegging
A keg is a returnable stainless steel container for draught beer. Kegging lines wash, sterilize and fill them through a spear valve.
Lautering
Separating the sweet liquid (wort) from the spent grain, using the grain bed itself as a filter.
Malt
Cereal grain, usually barley, that has been steeped, germinated and dried. Malting develops the enzymes and sugars the brewer extracts in the mash.
Mash tun
The vessel where mashing takes place. In many brewhouses it is combined with the lauter tun as one mash/lauter vessel.
Mashing
Mixing milled malt with hot water and holding it at set temperatures so enzymes convert starch into fermentable sugars. Beer & alcohol bottling lines →
Original gravity (OG)
The density of wort before fermentation, showing how much sugar is available. Expressed as specific gravity or degrees Plato.
Sparging
Rinsing the grain bed with hot water during lautering to recover remaining sugars.
Total package oxygen (TPO)
All oxygen in a sealed package, dissolved in the beer plus in the headspace. Low TPO protects flavor stability and shelf life.
Tunnel pasteurizer (for beer)
A conveyor tunnel that heats filled bottles or cans in staged hot-water sprays to a set number of pasteurization units, then cools them. Tunnel pasteurizer →
Whirlpool
A vessel or step where hot wort is spun so hop and protein solids (trub) collect in a cone at the center for removal.
Wort
The sugary liquid drawn from the mash. It is boiled with hops, cooled and then fermented into beer.
Wort boiling
Boiling wort, usually for an hour or more, to sterilize it, extract hop bitterness, drive off unwanted volatiles and coagulate proteins.
Wort cooling
Rapidly chilling hot wort through a plate heat exchanger to yeast pitching temperature, often with glycol or chilled water. Beverage water chiller →
Yeast pitching
Adding yeast to cooled, aerated wort to start fermentation.

Related equipment

More glossaries